Crown Self-Priming Solids Handling Pumps for Heavy-Duty Wastewater Applications

Crown Self-Priming Solid Handling Pumps offer best-in-class features & best value on investment. They are designed specifically for unscreened raw sewage or industrial waste applications.

Self-Priming Solids Handling Pumps for Heavy-Duty Wastewater Applications

Self Priming pumps don’t require manual priming, which often involves pouring buckets of water down into the pump and pipe which can be a slow and messy process. Self priming pumps often require the first prime to be manual however. Once you initially prime the pump, it will maintain prime as long as there are no pressure drops on the suction side of the line.

Solids handling pumps are employed to pump raw sewage during sewage lifting, which is then directed to a treatment facility. The ability of these pumps to process heavy solids increases the efficiency of the wastewater pumping process.

Crown Self Priming Solid Handling Pumps Lead the Category with their Specialized Features

Crown’s Centrifugal Solids Handling pump range is well-known for its efficiency and reliability in wastewater applications.

These pumps are specially designed to handle solids in a wide range of heavy-duty wastewater applications.

These pumps can handle spherical solids, measuring a maximum of 3” in diameter (depending on the model), and feature a discharge capacity ranging from 11/2” to 10”.

Other features that make Crown extremely efficient for wastewater applications include a Total Head measure that goes up to a maximum of 184’, and a Fluid Lifting Rate of 4400 GPM. The continuous media temperature of Crown pumps is 160 ⁰ F.

The external design of Crown pumps is meticulous and cost-conscious. The power frames are designed to be contaminant-free. Machine bearings are lubricated with grease, which ensures the smooth functioning of the pumps over a long period of time. These features reduce the operating and maintenance costs of the machine in the long-term.

Crown pumps can handle the demands of wastewater applications that feature unscreened raw sewage. They are also efficient for heavy-duty industrial wastewater treatment processes.

Crown pumps are ideal for achieving high-performance results in municipal, industrial, and marine sectors. They are also a valuable asset for applications involving corrosive fluids.

High-Performance Features of Crown PO10LA-14X Self Priming Pump Series

The Crown PO10LA-14X Series is a specialized series for handling industrial wastewater processes and applications involving unscreened raw sewage.

In industrial settings, the Crown PO10LA-14X Series is ideal for handling wastewater, raw water, and barge stripping.

Crown PO10LA-14X Series Self Priming Solids Handling Pump

This self-priming pump series delivers high performance in municipal applications such as wastewater treatment, sewage lift stations, and sludge digestion.

These centrifugal pumps come with high-performance features, including:

• A hardware design that is resistant to corrosion
• Construction made of cast iron
• A shaft made of high carbon steel
• An open impeller of ductile iron construction, featuring 2 vanes
• A single mechanical seal made of ceramic, Buna or carbon; comes with grease lubrication
• Spherical solid handling – pumps can handle up to 3” of spherical solids
• A suction capability of 10” NPT
• A discharge capability of 10” NPT

Tips to Buy and Handle a Solids Handling Pump

• Provide a self priming pump with an initial supply of liquid. Such supply is essential to initiate the recirculation process of the pump.

• Adhere to a pump’s Total Head measure strictly. While it is true that self- priming pumps can lift liquids efficiently, going above specified limits can damage the machine. Refer to the pump’s NPSH (Net Positive Suction Head) curve chart and lift liquids only to levels specified.

• Look for solids handling pumps with a reinforced suction line design. Such design avoids air leaks. It also prevents the risk of too much air accumulation in the suction line.

About Crown

Crown is a brand label of Crane Pumps & Systems, a company that has been delivering high quality and performance since 1855. The company specializes in delivering innovative pump solutions for handling wastewater efficiently. Pump products by the company are manufactured in Ohio’s town of Piqua.

The company manages the design, engineering, manufacturing, sales and customer service processes related to its pump products, by itself. As a result, quality control is highly efficient, resulting in only high-performance pump products for its customers.

The company has been actively supporting its Piqua community through job opportunities and community welfare activities.

About PumpProducts.com

PumpProducts.com is a Master Stocking Distributor that brings only the most reliable pump products to its customers. The distributor has a nation-wide service with a shipping capability to all regions of America.

PumpProducts.com relies on its in-depth know-how of selling pump products to a large nation-wide market. The company is committed to providing its customers with best-quality and top-brand pump products at the lowest price.

Find the best self priming pump range at PumpProducts.com.

Share