Pumping is a major process that is crucial in industrial processes and domestic works alike. High-quality pumps are necessary to lift water and other fluids from deep wells. In the case of submersible pumps, corrosion resistance is a critical aspect for ensuring continuous operations for long time. In this blog, let us explore submersible well pumps from Franklin Electric and Berkeley.

 Submersible Well Pumps

A submersible pump operates while completely submerged in water (fluid). It is a category of the centrifugal pump but with slight modifications, making it capable of submerged operations. The submersible pump derives its power from a motor. The motor rotates an impeller leading to outward water flow. In submersible pumps, the motor is covered within a waterproof seal and close-coupled to the pump body.

Usually, a single-stage pump is used for domestic purposes. But for industrial purposes, a multi-stage pump is necessary. Submersible pumps require less energy for operation as the water pressure naturally pushes the water into the pump. As the pump is already in the water, there is no requirement for priming also.

Multiple submersible pump models are readily available in the market with varying technical specifications. They can operate for a variety of uses, such as filtration, sewerage pumping, etc. But you should be well aware of your requirements before selecting them. Flow rate and power requirements are the two major factors to consider while selecting a well pump. Let us explore some of the best submersible well pump models from Franklin Electric and Berkeley.

The Best Submersible Pumps for Your Well System

Once you are sure about your requirements, choosing the right submersible pump is very crucial. This is very important from the perspective of both performance and cost.

Franklin Electric Tri Seal Series

The TRI-SEAL series of submersible pumps from Franklin Electric is designed to operate even in the harshest conditions. These 4 inch (ca. 10 cm) pump models feature an innovative TRI-SEAL floating system. The system makes these pumps highly efficient and protects against wear and tear, especially when dealing with abrasives. Additionally, the advanced impeller hub seal system is capable of preventing fluid recirculation during pumping.

·        Franklin Electric 93741030: The 10JS05P4 model from Franklin is a 4” well pump powered by a 0.5HP corrosion-resistant motor with a 3-wire system. This model operates at 115 V. With 6 stages of operation; it can handle a maximum flow rate capacity of 14 GPM and a TDH of 244 ft (ca. 74 m). It can handle water temperatures up to 120 °F (ca. 49 °C). The impeller and diffuser are made from abrasion resistant material. It features a spring-loaded check valve and a phenolic washer that provides down-thrust protection.

·        Franklin Electric 93761010: The 10JS05S4 well pump model from Franklin features a 0.5 HP motor a 2-wire system. It has an operating voltage of 230 V. The special ‘Celcon’ impeller is highly efficient and is resistant to abrasion. An efficient stainless steel hub system maintains proper sealing and prevents fluid recirculation. It has ceramic shaft sleeves and rubber bearings that prevent wear and tear. The pump is capable of handling a flow rate of 14 GPM and a total dynamic head of 244 ft (ca. 74 m). It can easily handle water temperatures up to 120 °F (ca. 49 °C).

Berkeley JP Series

The Berkeley JP series of deep well submersible pumps are high precision and corrosion resistant models. They can deliver high flow rates and reach head heights up to 650 ft (0.2 km) even in tough conditions. It features an advanced SignaSeal staging system.

·        Berkeley B10P4JP05231-03: This well pump from Berkeley is suited for multiple applications, including industrial, irrigation, and domestic. It features a 3-wire, 0.5HP motor and operates at 230 V. The pump intake, discharge, and motor shell are all made up of high-grade corrosion-resistant material. The SignaSeal staging system and the floating impeller system are very effective in protecting against abrasives and sand lock-up. It is capable of attaining a flow rate of 10 GPM.

·        Berkeley B15P4JP07231-02: This JP series model from Berkeley features a 0.75HP, 3-wire motor. It operates at 230 V and is capable of reaching a maximum flow rate of 15 GPM. High grade stainless steel coating on its shell and shafts acts as protection against corrosion. The proprietary SignaSeal staging system is highly resistant to sand and other abrasive materials.

Franklin Electric

Franklin Electric works across the spectrum of water management solutions, offering quality products. Its diverse portfolio includes pumps, motors, and related accessories. With a vast network of manufacturing and distribution facilities, they cater to both domestic and industrial customers. The company offers a robust after-sales mechanism that makes it a leader in customer-centric business practices. Since its inception in 1944, the company focuses on developing innovative products for their customers.

Berkeley

Berkeley from Pentair has a rich experience in dealing with water pumping solutions since 1973. Their product portfolio consists of water pumps, storage tanks, and control systems. They mainly cater to domestic and irrigation applications. Being a part of the Pentair group, the company invests heavily in research and development. The products from Berkeley are the result of constant innovation, something that creates value for the customer.

Pump Products

PumpProducts.com is a trusted distributor of pumps and accessories across the U.S. The website aggregates pump models from multiple brands and make it available for the consumer. With a team of experienced service executives and engineers, they help customers in selecting the right pump products as per the need. The website displays in-depth information regarding various pump models. If you are planning to purchase a new well pump, do check out www.pumpproducts.com today itself.

Share

If you are not sure what an effluent pump does, here’s the answer. This pump works to pump ‘gray water’ or dirty water in different forms. The dirty water may include limited solids. Typically, the effluent pump will pump out the gray water and other wastewater effluents from a septic tank to a leach field.

A sump pump should is not the same thing as a septic effluent pump. A septic effluent pump comes with a greater level of durability in comparison to a sump pump. It can remove water at a higher demanding level. Effluent pumps may last for decades depending on how hard the effluent pump has pushed gray water,

Barnes Effluent Pumps and Goulds Effluent Pumps are currently the best effluent pumps available. Barnes effluent pumps and Gould Effluent Pumps can handle most high head and low applications.

Features and Benefits

Barnes 096727

This model of Barnes BP series Effluent Pumps can work efficiently in residential and light industrial applications. These pumps are specially designed to handle sewage effluent and are capable of handling spherical solids up to ¾”.

This pump operates in a single-phase and includes overload protection. It has a 2” NPT female vertical discharge. It is dynamically balanced with 2 vanes consisting of an open impeller with pump-out vanes on the backside. This pump has a single-row ball with upper and lower oil-lubricated bearings. It has a cast iron volute, seal, and motor bearing.

The pump can work continuously under the 77 °F (25 °C) liquid temperature. It comes with a 15 feet (4.57 meters) power cord.

Barnes 100834

This model of Barnes Effluent Pumps is capable of handle sewage effluent in the septic tank. Its application in residential and light industrial is highly efficient within the limits of ¾” spherical solids.

The pump has a capacity of 1/3 HP and requires 115 Volts on a single Phase. Its vertical NPT discharge is 2″, and it has a maximum of 70 GPM and a maximum head of 30 ft (9.14 m).

Goulds WE0311L

Goulds Effluent Pumps in the WE series submersible effluent pumps are residential wastewater pumps specially designed for on-site wastewater treatment. These pumps are capable of functioning efficiently in several settings, including effluent systems, industry, hospitals, schools, motels, trailer courts, farms, and homes. They come with an extended warranty for residential applications.

The cast iron impeller in it is semi-open and non-clog with pump-out vanes to provide for mechanical seal protection. There is an option for a silicon bronze impeller. It works in balanced and is smooth in its operation. Its cast-iron volute type casing provides maximum efficiency, while its discharge is 2” NPT.

The stainless metal parts in it are BUNA-N elastomers, while its mechanical seal is silicon carbide.  Its shaft has threads and is made from corrosion-resistant stainless steel. Additional protection has been provided in the form of locknut on all models. This is meant to protect against accidental reverse rotation and to guard against component damage.

The pump has fasteners made of stainless steel under 300 quality. When fully submerged, this pump can operate continuously, although it is also designed to run dry without damage to the components.

Goulds WE0311M

With Goulds Effluent Pumps in the Goulds WE0311M model, you can find numerous applications, whether homes or farms. It works perfectly at its peak efficiency in effluent systems, industry, schools, motels, hospitals, and trailer courts.

This pump has been designed for maximum efficiency with cast iron volute and cast iron semi-open impeller. The mechanical seal protection and balanced, smooth operation are ensured with pump-out vanes. The best quality stainless steel and silicon carbide ensure the quality of construction material to make this pump safe, sturdy, and efficient. All models come with a locknut to protect and guard against reverse rotation and component damage.

This pump has built-in overload protection with automatic reset. It is designed to work continuously when fully submerged, and it can also run dry without damage to components.

Barnes & Goulds Company

Barnes Pumps, founded in 1895, continue to deliver innovative and cost-effective solutions. They provide solutions for essential applications like sewage and wastewater to fountain pumps, including revolutionary pressure sewer systems.

Goulds Pumps company is a part of ITT Corporation, while Goulds Water Technology is a brand of Xylem Inc. The ITT corporation provides pump products for the industrial market.

Pump Products’ company

Pumps Products is a master pump and parts distributor that sells directly to the industrial market and contractors. The company sells the highest quality pumps, parts, and motors at the lowest prices. The company stocks all major brands.

Share

A centrifugal pump makes use of rotational energy from driven rotors or impellers to transfer fluids. The impeller has curved vanes that are either sandwiched between 2 discs in an enclosed impeller or backed by a single disc in an open impeller. Goulds Centrifugal Pumps and Grundfos Centrifugal Pumps are two such varieties that are beneficial to use.

In centrifugal pumps, fluid enters the impeller along the axis, and its pressure and velocity are increased, and it is then directed towards the pump outlet. Centrifugal pumps typically help to pump water, organics, bases, oils, acids, or solvents for agricultural, industrial, or domestic purposes.

Now let’s take a look at some features and benefits of Goulds Centrifugal Pumps and Grundfos Centrifugal Pumps.

Features and benefits of Goulds MCS Series

Goulds Centrifugal Pumps (MCS Series) consists of single, and 3 phase pumps with multiple power outputs, suction/discharge sizes, as well as voltages. They’re strong and are of high-quality thanks to their NPT threaded stainless steel construction, with an accessible vent and centreline connections. AISI 304 and 316L materials used for liquid handling are corrosion resistant and ductile. The series is equipped with an enclosed impeller that has a floating seal ring design so that adjustments are not required over the lifespan. Its rugged ball bearing design allows it to deliver under several conditions. It comes with a VITON or BUNA mechanical seal. The MCS Series Goulds Centrifugal Pumps are equipped with fan cooled motors that are drip-proof.

Features and benefits of Goulds 100MS1C1E0

AISI 304 and 316L stainless steel used in its construction makes it corrosion resistant. It is equipped with BUNA elastomers and a John Crane seal. This Goulds Centrifugal Pump does not require adjustments to be made thanks to the impeller’s floating seal ring design. It functions at 115/230 volts with a frequency of 60 Hz at a speed of 3500 RPM. It comes with a NEMA standard motor that is drip-proof and has fan cooled enclosures.

This pump can be applied to a variety of functions, including:

• Water circulation
• Heat exchangers
• Chillers
• Filtration systems
• Air scrubbers
• Liquid transfer
• OEM applications

Features and benefits of Goulds 1MS1C5E4

This AISI 304 and 316L stainless steel stamped and welded pump is corrosion resistant. This Goulds Centrifugal Pump has NPT threaded construction, which makes it strong and durable. It has a mechanical seal carbon with Sil-Carbide faces as well as VITON elastomers. Its vent is easily accessible, and it comes with stainless steel plugs. Good for a variety of operating conditions due to its rugged ball bearing design. Functions at 208-230/460 volts with a frequency of 60 Hz at a speed of 3500 RPM. It can handle maximum working pressure of 75 PSIG and a temperature of 212°F. It can be used in a variety of liquid transfer applications.

Features and benefits of Grundfos CR-H Series Centrifugal Pumps

Grundfos Centrifugal Pumps of the CR-H series are excellent for installation in horizontal end suction piping. They offer the efficiency of operations and have high reliability. Grundfos Centrifugal Pumps can easily be removed and serviced. They have back pullout capability. They’re made of rugged cast iron and are good for aggressive liquids.

They’re good for a variety of applications such as:

• Water pressure boosting
• HVAC
• To pump acids and alkaline substances
• For industrial and chemical processing
• Filtration, washing, and cleaning systems
• Irrigation

Features and benefits of CR-H SERIES HORIZONTAL (Grundfos 97653281)

This Grundfos Centrifugal Pump reduces internal wear. You can benefit from reduced downtime and save on energy as well as maintenance costs. This service friendly centrifugal pump from Grundfos weighs 63 lb and can tolerate a maximum flow of 5.72 GPM and temperature of 250°F. It is constructed with cast iron, making it corrosion resistant and good for aggressive liquids. It is efficient, reliable, and will save you space.

Features and benefits of CR-H SERIES PUMP END (Grundfos 97534127 model)

This service friendly pump weighs 40 lb and can tolerate a maximum flow of 5.73 GPM and temperature of 250°F. Cast iron is used in its construction, making it corrosion resistant and suited to aggressive liquids. It is easy to remove and service. It offers the efficiency of operations and is highly reliable. There is lower downtime with this pump, and it requires lesser effort to maintain. You will benefit from lower energy costs with this Grundfos Centrifugal Pump.

Goulds

Beginning in the mid-19^th century, Goulds was the first iron pump manufacturer in the world. Today, it is the largest maker of consumer, industrial, as well as agricultural pumps. Water Technologies and Industrial Products are the company’s 2 main groups.

Grundfos

Grundfos is a Denmark based pump manufacturer offering its pumps globally. Grundfos makes pumps, electronics for pump control systems, electric pump motors, and its products are used for domestic heating, water utilities, fire protection systems, irrigation, as well as dosing equipment.

Pump Products

A nationwide distributor of pumps, electric motors, and pump parts, PumpProducts.com is committed to delivering quality to customers at affordable prices. Our engineers are ready to help with any doubt you may have if our catalog list doesn’t satisfy you. Get in touch at Tel.: 1800.429.0800

Share

Sewage treatment is a complex process that involves separating water from the numerous particulate matter and microorganisms that are present. One component of a sewage/water treatment system the help quickly and effectively separate various particles from the water is the pump basin.

What are the pump basins?

Pump basins in a sewage/water treatment system refer to those components that collect and store the contaminated water until it is ready to be treated. The objective of using a basin is three-fold:

• Pump basins control the flow of sewage into the treatment system by holding-off the excess water until the system is able to treat it.
• Basins can prevent the overflowing of contaminated water when there is rain by acting as a container that stems from the sewage flow.
• Basins enable the heavier sludge and large particles to settle down at the bottom, letting only water pass through to the treatment system. This prevents dangerous large particles from getting stuck in your water filtering and treatment system at the later stages.

Why aren’t pump basins the same everywhere?

Pump basins differ based on the following criteria:

• Usage – Pump basin models are specifically designed to suit residential, commercial, or industrial needs. This is because the amount of sewage and the nature of contaminants to be treated will be different in each type of building.
• Sump pump pit size – The pump basin you buy must fit snugly into the pump pit. Otherwise, there is a chance of sewage overflow.
• Components/accessories – Some pump basins also come with basin covers, discharge pipes, and lids. Others don’t have or need these accessories. This depends on your usage needs.

The best pump basins and basin accessories to buy

When it comes to must-buy sump pump basins, here are a few models you can consider:

Goulds Centripro Duplex Assembled (36″ x 48″) Basin

• This is one of the premium-quality duplex Goulds Basins available for residential and commercial use. It comes fully installed and ready for 2-inch corrections.
• Pumps must be bought separately, but this product comes with guide rails. Other inclusions in this product are – junction box, basin, cover/lid, hub, vent, piping, valves, and anti-float ring.
• The base elbow disconnects are available in a standard size of 2″, customizable on-demand to 1-1/4″ and 1-1/2″.
• The entire basin and guide rail are constructed using superior stainless steel material. This prevents corrosion.
• The cast-iron inlet hub and steel hatch cover are very robust and stand up to long usage.
• The discharge depth is 12”.

Goulds Centripro Duplex Assembled (36″ x 120″) Basin

• This is the bigger variant of the duplex Goulds Basins for sump pumps and water treatment systems.
• This product comes with a guide rail package. It includes the basin, steel cover, junction box, stainless steel guide rails, anti-float ring, vent, cast iron inlet hub, piping, isolation valves, and Conery base elbow that disconnects at 2”.
• The construction made of stainless steel and cast iron makes this basin extremely tough and non-corrosive. The product is perfect for use when treating sludge and harsh contaminants.
• This basin is very customizable, with 1-1/4″ and 1-1/2″ elbow disconnects available on demand.
• Pumps are sold separately from this Goulds Centripro basin.
• This is one of the best Little Giant Basins for long-term, heavy usage.
• The Little Giant 14940653 basin comes in a superior-quality Polythylene construction, which is a corrosion-resistant plastic. It is perfectly suited to storing and filtering sewage with abrasive chemicals.
• The basin is of 18”X22” diameter, perfect for residential and small-size commercial plumbing needs.
• The basin is very light-weight, and shipping it will be very easy.
• The basin does not come with any accessories, which can be bought separately.
• Warranty up to 5 years available on construction quality.

Little Giant 113095, Basin, 20″ X 30″

• If you have one of the WCR series of water/sewage treatment systems, then the Little Giant 113095 is one of the best Little Giant Basins to use.
• This 20″ X 30″ sump pump basin is made using premium-quality materials, designed to handle heavy sewage flow.
• This basin has complete warranty coverage for up to 5 years for any construction quality and workmanship issues.
• It is ideal for use in homes, office buildings, factories, and small farms.
• Accessories are not a part of this basin; however, Little Giant basin accessories can be purchased separately.

Pump basin accessories to purchase

So far, we’ve been talking about Sewage Basins. But there are a few key basin accessories that you need to purchase to ensure your basin works efficiently and effectively. These accessories include:

Basin lids/covers, which can be used to close the basin, when it’s not in use, to prevent foreign contaminants from further contaminating your water.

PVC pipes are the ideal plumbing choice because of their lightweight, varied temperature capabilities, ability to handle high water pressure. They are adaptable to different water systems and sustainable compared to other types of pipes.

Two Little Giant basin accessories you can consider are:

Little Giant 113057, 18″ Base Cover/Lid Assembly

• This Little Giant 113057 18” basin cover/lid is the perfect way to keep your water/sewage treatments in order by preventing new contaminants and particulates from mixing with the stored liquid.
• This basin cover/lid is available in two variants – one with a 2” vent and a 3” discharge; another with a 3” vent and a 2” discharge.
• If you’re using a Little Giant 14940653 CS-SS system, you can purchase a different model of the 18” basin lid/cover.

Little Giant 113423, 2″ x 30″ Schedule 80 PVC Pipe

• This 2″ x 30″ Schedule 80 PVC pipe is perfect to be used with basins of various sizes and applications.
• The PVC pipe comes with a 2” discharge.
• This PVC pipe model, in particular, can be used to replace damaged PVC piping in the 9S-SMPX-LG and 10S-SMPX- LG Little Giant water management system models.
• You can also purchase the 3″ x 30″ Schedule 80 PVC pipe if you require a larger discharge.

You can purchase other basin accessories, including – Little Giant 925033, 2″ 1-hole Grommet and the Little Giant 113075, 4″ Cast Iron Hub Kit for 30″ diameter basins.

About Goulds

Goulds is a premier water technology specialist and a part of Xylem Inc. The company works with various for-profit and not-for-profit companies, helping create cleaner, potable water for people everywhere. You can find a fine range of water management and treatment systems with Goulds.

About Little GIANT

Little Giant is a water transfer expert, manufacturing some of the best sewage sump pumps, water treatment systems, utility pumps, garden pumps, condensation removers, well pumps, and more. Their plumbing and HVAC solutions are reputed across the United States.

About Pump Products

PumpProducts is a dedicated supplier of premium-quality sump pumps, water management systems, pump accessories, motors, and a variety of repair/replacement parts. Shipping prices are budget-friendly, perfect for both residential and commercial facilities.

Share