Explosion proof pumps are used in hazardous environments like oil rigs, mines, and chemical plants. Pumps like AMT explosion proof pumps enclose around motors and vulnerable parts of the pump. The insulation prevents combustible elements from triggering vapor and causing external or internal explosions. The areas where explosion pumps are placed are defined by the National Fire Protection Association and the National Electric Code.

Since there are several plumbing applications where an explosion might occur, Barnes explosion proof pumps can take several forms. For instance, there are explosion proof sump pumps, explosion proof transfer pumps, and even explosion proof submersible pumps.

Features and benefits of explosion proof pumps

Explosion proof pumps are built to high standards. This pump type prevents sparks from occurring in flammable and hazardous environments where explosions are likely. Explosion proof pumps are cast with a thick outer covering. The external enclosure is so strong that it can withstand any internal mishaps that might cause an outward force during operation. They also have stringent motor winding standards. It works on preventing ignition effects that may spread from the internal to the external atmosphere. Lastly, the interfaces are created to control gas expansion in such a way that cools it before letting it safely exit through flame-prevention paths.

The type of water and how the space is classified determine when to use an explosion proof pump. In most wastewater applications, these are the preferred type of pump because the gasses that permeate the wastewater cannot set off an explosion.

Barnes explosion proof pumps are useful in industrial water uses as well, such as chemical, cleaning, or oily fluids. With most stormwater and clean water scenarios, explosion proof pumps are not used or required. The designation given for a hazardous environment by the NEC may require the implementation of an explosion proof pump in the pump station. In most scenarios, these areas are labeled as Class 1 or Division 1. Sometimes they’re also given the designation of ‘zone’. Apart from these situations, there are additional scenarios where an explosion proof pump might be necessary. When installing these specialty pumps, they must be grounded and bonded according to necessary safety codes.

Barnes Explosion Proof Pumps

The Barnes series of underwater grinder pumps are ideal for high flow, wastewater grinding uses seen in light industrial, commercial, and municipal environments. The Barnes XGV series offers long-lasting durability and easy maintenance. Barnes explosion proof pumps are designed with the revolutionizing Barnes scilerator radial cutting tech. They have an oil-filled motor and plug-and-play “Quick Connect” cord.

These pumps are the best solution for high flow, high head applications involving the use of difficult solids such as ropes, cloth materials, diapers, and plastics. Barnes explosion proof pumps are used in refineries and petrochemical. These pumps convert different types of sewage into a fine slurry. The company creates different types of explosion proof pumps such as dynamic pumps, centrifugal pumps, positive displacement pumps, rotary pumps, and specialty pumps.

An example of Barnes explosion proof pumps is their Blade Grinder series. They are efficient at high head flow waste. These pumps are available in 3HP-15HP. These pumps are designed for easy maintenance and durability.

AMT Explosion Proof Pumps

AMT Pumps are chemical, electric motor-driven pumps are meant for hazardous duty. AMT created these centrifugal pumps in stainless steel and cast iron. Also called EXP pumps, they are self-priming and end suction designs. AMT explosion pumps vary in size range from 1.2HP-15HP.

AMT explosion proof pumps are installed in industries involving pumping solvents, chemicals, or other liquids with a low flash point which needs EXP machinery. Some features of AMT explosion proof pumps are:

• Sealed with Ni-resist and carbon faces
• Can withstand temperature up to 160˚ F
• Has a maximum flow of 128 GPM
• 1-1/4″, 1-1/2″ and 2″ NPT port sizes
• 1/2 to 2 HP Single and Three (3) Phase 3450 RPM motors.

AMT pumps are a subsidiary of Gorman-Rupp. These pumps are self-priming, explosion-proof, centrifugal pumps that can be used in any environment that has flammable liquids or hazards. All the models are capped with Viton®* seals. This enables the pump to handle liquids at high temperatures.

Pump Products

PumpProducts is your ultimate, one-stop destination for purchasing AMT and Barnes explosion proof pumps. Our expert team will provide the necessary information about our selection of pump models. They will help you choose the right pump for your requirements. If you’re considering AMT explosion proof pumps, then check out the link for more information. PumpProducts is committed to supplying customers with the best quality pumps, controls, electric motors, and parts in the market at competitive prices.

Share

Having a reliable circulator pump is essential to the smooth functioning of your heating or cooling system. If you’re looking for a new, premium-quality circulator pump, then look no further than Wilo Circulator Pumps and Taco Circulator Pumps. Both these circulator pump brands are reputed for their premium quality, durability, features, and affordability. In this article, we’ll explore Wilo Circulator Pumps and Taco Circulator Pumps in greater detail.

But first, let’s understand what a circulator pump is.

What are Circulator Pumps?

Circulator Pumps, such as Wilo Circulator Pumps and Taco Circulator Pumps, are a type of centrifugal pump. They help keep a consistent circulation of liquids or gasses inside a hydraulic heating or cooling system. In some applications, a circulator pump may even circulate slurry or other materials as needed. It is often a pump that is added to the water system of residential and commercial properties. Through the circulator pump’s efficient working, hot or cold water is easily available at every faucet across the property.

Circulator pumps are imperative to keep your home or office space at the right temperature and also well-supplied with hot and cold water. If you’re interested in either replacing an old circulator pump or installing a new one, consider Wilo Circulator Pumps and Taco Circulator Pumps.

Features and benefits of Wilo Top S Series

Wilo Circulator Pumps are a highly popular circulator pump brand. The Top S Series of Wilo Circulator Pumps, in particular, is excellent for commercial and industrial applications that require heavy-duty work. It’s a great choice for a pump because:

• It can be attached and assembled to any hot water system and cooling circuits across industries.
• It is compact and can be installed with ease.
• It is not noisy and is ideal for spaces requiring a quiet pump.
• It is coated using the Cataphoresis method, which reduces the risk of corrosion.
• It can handle temperatures between 14°F and 248°F (-10°C and 120°C).
• It boasts of H Protection Class.

In the Wilo Circulator Pumps Top S Series, you’ll find the following two models the best candidates for your new circulator pump:

Wilo 2067542

The Wilo 2067542 is a cast iron pump that comes with a Cataphoresis coating that protects it from corrosive materials. It’s an excellent pump because:

• It can operate at 2 different speeds, at the same voltage of 115 volts.
• It has a premium-quality aluminum electrical box casing.
• It has a 2-bolt flange that is 1.25″ in size.
• It can support glycol and water concentration up to 50% without getting damaged.
• It can be used for a variety of applications, including the generation of geothermal or solar power.

Wilo 2067588

Next, we have the Wilo 2067588 model from the Wilo Circulator Pumps Top S Series. It is powerful and is a 3-phase circulator pump that has the following features:

• It is a 2-speed pump that runs on 208/230 volts and 1-3/4 HP.
• It has a cast iron construction with certain parts made of premium-grade cast aluminum.
• It comes already vented and is very easy to maintain.
• It has a unique thermal overload sensor that protects the pump from overheating.
• It is highly durable, made using cast aluminum and iron that is Cataphoretic coated, metal-infused carbon, stainless steel shaft, and an impeller made of composite material.

Features and benefits of Taco 008 Series

Another circulator pump brand for you to evaluate is Taco Circulator Pumps. The Taco 008 Cartridge Circulator series from Taco Circulator Pumps is a heavy-duty pump that is perfect when you want a circulator pump for every day, high-intensity usage. It is suitable for all residential, commercial, and industrial applications due to the following reasons:

• Its parts are field serviceable, and you won’t have to dismantle the entire set-up during maintenance.
• The design has a self-lubricating feature that ensures the pump always works seamlessly.
• It is available both in bronze and cast iron.
• Its compact design can support a high output at low power consumption.
• It comes with optional sweat connections.

In the Taco Circulator Pumps Taco 008 Cartridge Circulator series, you’ll find the following two models worth taking a look at:

Taco 008-F6-3IFC

The Taco 008-F6-3IFC comes with a cast iron construction that is highly durable. It also boasts of the following features:

• It operates on 115volts at 1/25 HP.
• It is built with an Integral Flow Check that minimizes installation and maintenance efforts.
• It is available with a flange-to-flange warranty for 3 years.
• Its precision technology has on-site serviceable parts.
• It does not have a mechanical seal and is self-lubricating.

Taco 008-ZSF6

Another model in the Taco Circulator Pumps Taco 008 Cartridge Circulator series is the Taco 008-ZSF6 model. It is liked by many businesses because:

• It has a reliable stainless-steel body that runs on 1/25 HP and 115 volts.
• It is designed with a Priority Zoning circulator, making it a state-of-the-art pump.
• It has moving parts and an easy-to-replace cartridge slot.
• It can support various industrial applications from in-floor heating to water recirculation systems.
• It comes with a 3 years flange-to-flange warranty.

Wilo overview

Wilo Pumps is a reputed European manufacturer of pumps and pump systems based in Germany. Wilo Circulator Pumps have been used in commercial, industrial and domestic applications for decades.

Taco overview

Taco Pumps is a family-owned American business that specializes in pumps, pump systems and replacement parts. Taco Circulator Pumps have supported many American homes and offices with their precision technology for years.

PumpProducts overview

PumpProducts.com is a reputed online distributor of pumps, motors, and pumping accessories. We can deliver premium-quality Wilo Circulator Pumps and Taco Circulator Pumps to your destination at highly affordable rates.

Share

If you live in the city, you may not be familiar with a well pump. However, it is very common among those living in rural and remote areas. Most households in rural areas use a well for their water supply, and almost all of them have an electromechanical system to draw water from these wells. The well pump is the heart of this electromechanical system, facilitating the extraction of water from underground water sources.

There are many well-known manufacturers in the market offering high-quality well pumps. Red Lion well pumps and Sta-Rite well pumps are quite popular for their performance and durability.

How do well pumps work?

Well water systems work by lifting water from an underground well and delivering it to a storage tank. Modern well pumps are mostly electric and use suction to draw the water through the pipes. Most households use jet pumps or submersible pumps to pump water from underground.

Well Pumps are not designed to run continuously. To ensure that there is consistent water pressure at all water fixtures, water is first moved to a storage tank. Modern tanks come with an air bladder that gets compressed as water is pumped in. The water pressure in the tank is responsible for moving the water through the pipes in the house.

A switch automatically stops the pump when the water pressure reaches a preset level, somewhere between 40 and 60 PSI. You use water for many household activities, and as water gets used up, the water pressure also drops. When water pressure drops to about 20 PSI, the switch turns the well pump back on. The cycle is repeated every time the water pressure drops to a designated level.

What size well pump do you need?

The size of the well pump depends mostly on the water needs of your home. Well pumps are rated in gallons per minute (GPM). If you own a 3 to 4 bedroom house, you will probably need a well pump rated between 8 and 12 GPM. You may need to add one GPM for every additional water fixture in your house, such as washing machines, dishwashers, showers, faucets, and outdoor water spigots.

If you are in the market for reliable well pumps, you should consider buying Red Lion well pumps and Sta-Rite Well pumps.

Red Lion RJS-XX series

The Red Lion RJS-XX series well pumps are ideal for supplying fresh water to rural farms, homes, cottages, and cabins with suction lifts down to 25 feet. These pumps can easily handle the water needs of large homes, cottages, and farms. It comes in a rugged cast iron casing that prolongs their life and reliability.

Red Lion 602206 Model RJS-50-PREM

The Red Lion 602206 Model RJS-50-PREM is a shallow well jet pump suitable for installations where the vertical distance from the pump to the water level does not exceed 25 feet. This well pump comes with a robust dual voltage motor (115/230 volt) with a capacitor for increased starting power. It also includes a factory pre-set 30/50 pressure switch that produces up to 50 PSI with automatic shut-off.

Red Lion 602207 Model RJS-75-PREM

The Red Lion 602207 Model RJS-75-PREM is suitable for the high water demands of North American homes with multiple water fixtures. It comes with a powerful dual-voltage motor that can be changed between 115 volts and 230 volts. This well pump is designed for wells with suction lifts down to 25 feet. Its rugged cast-iron casing ensures prolonged shelf life and reliability.

Red Lion 602208 Model RJS-100-PREM

The Red Lion 602208 Model RJS-100-PREM helps keep your rural home, cottage, farm, or cabin supplied with fresh water all year round. The powerful well pump is designed with a dual-voltage motor (115/230 volt) with the capacitor. It also comes with a rust-resistant and corrosion-resistant cast-iron casing to ensure a long service life and reliability. It also features a 50 PSI, a 23 GPM flow rate with automatic shut-off, and a pressure switch pre-set at 30/50.

Sta-Rite PN series

The Sta-Rite PN Series well jet pumps are corrosion and abrasion-resistant, ensuring long life and durability. They are highly suited for wells with pumping levels of less than 25 feet. It comes with a 30/50 pressure switch and is ideal for marine use, general boosting, mist sprayers, and similar water features.

Sta-Rite PNC-10

The Sta-Rite PNC 10 is a self-priming shallow well jet pump with a dual-voltage motor (115/230 volts). Its thermoplastic polypropylene body reinforced with fiberglass provides high corrosion resistance and resistance to abrasion, offering prolonged life and reliability. It comes in pre-set 30 to 50 PSI, allowing for cut-in pressure adjustments. The common applications of the pump include water systems, booster pumps, marine use, mist sprayers, poultry fountains, and water features.

Sta-Rite PNE-10

The Sta-Rite PNE-10 is an excellent shallow well jet pump with a maximum lift of 16.1 GPM. It comes with a durable, heavy-duty motor (1 HP, 115/230 Volt) easy to service. Its fiberglass-reinforced thermoplastic polypropylene body provides total corrosion resistance and high resistance to abrasion. The impeller has also been precision molded for the highest performance and efficiency.

Pump Products

Are you looking for well pumps that you can rely on? Look no further. Pumpproducts.com offers an extensive range of high-quality well pumps that deliver the highest performance and efficiency.  The company deals with some of the most well-known brands, including Red Lion well pumps and Sta-Rite well pumps. Visit their website today to look at the extensive range of pump products they have to offer.

Share

Dosing pumps are small, positive displacement pumps that have been designed to facilitate a precise flow rate of a substance or a chemical into water, gas flow, or steam. There is a multitude of ways through which a dosing pump does this. The general concept involves taking a measured amount of substance or chemical into a chamber and injecting it into the tank or the pipe that has been dosed.

These types of pumps are widely used in industry, agriculture, medicine, and manufacturing. If you are looking for a dosing pump, you can buy the Lutz-Jesco Magdos Dosing pumps from PumpProducts.com. Read on to learn more about them:

Lutz-Jesco

Lutz-Jesco is known for manufacturing dosing pumps and related components. They ensure that all of their products are top of the line in terms of quality and innovation. For about 60 years, Jesco has been a synonym for strong and extensive product lines.

Lutz-Jesco Magdos LA Series

These dosing pumps are space-saving and simple to use. Available in seven power ranges, these play an important part in dosing the liquids in process sequences accurately and reliably. The capacity range of the Lutz-Jesco Magdos LA Series is between 0.09 and 4.00 gph. It has a back pressure of max 232 psig. Suitable for floor and wall mounting, this dosing pump comes with dosing head ventilation, graphic display, external start/stop through release input, and level input with main alarm and early warning. The stroke frequency can be adjusted via keyboard. Made of construction materials like Ethylene Propylene Diene Monomer and Polypropylene, this is a UL and CSA certified dosing pump.

Now, let’s take a look into some of the models of the Lutz-Jesco Magdos Dosing pumps LA series:

Lutz-Jesco LA2 50251000 Dosing Pump

Lutz-Jesco LA2 50251000 Dosing Pump comes with a flow rate of 0.50 at Max Pressure and a flow rate of 0.61 at Medium Pressure. It can handle back pressure up to 232 psig and the average backpressure of 116 psig. The max stroke frequency is 160 Hz, and the max inlet pressure is 11. Made of PP/EPDM materials, this dosing pump has 9 suction lifts.

Lutz-Jesco Magdos LD Series

Lutz-Jesco Magdos Dosing pumps LD Series come with double-ball valves that ensure accurate dosing. In order to adapt the pump’s dosing performance, it is possible to adjust the stroke frequency by an analog input signal or manually. The Lutz-Jesco Magdos LD Series dosing pumps have a capacity range of 0.09 to 4.00 gph. The pump has a back pressure of max 232 psig.

Suitable for floor and wall mounting, this dosing pump comes with:

i) dosing head ventilation

ii) pulse operation available online through calculation wizard

iii) graphic display

iv) pulse input (reduction and increase) external start/stop through release input

v) and level input with main alarm and early warning.

The stroke frequency can be adjusted via keyboard. Made of construction materials like Ethylene Propylene Diene Monomer and Polypropylene, this is a UL and CSA certified dosing pump.

Check out a few models from the Lutz-Jesco Magdos Dosing pumps LD Series:

1. Lutz-Jesco LD1 50141127 Dosing Pump

Lutz-Jesco LD1 50141127 Dosing Pump offers a flow rate of 0.20 at max pressure and a flow rate of 0.29 at medium pressure. It can handle back pressure of max 232 psig with the average back pressure being 116 psig. It has a stroke frequency of max 250 Hz and inlet pressure of max 11. Made of PP/EPDM materials, it has 16 suction lifts.

Lutz-Jesco Magdos LB Series

Lutz-Jesco Magdos Dosing pumps LB Series is a great alternative for continuous and simple dosing tasks. Suitable for the process industry and water treatment, the LB series comes for seven capacity ranges. It is possible to use the stroke frequency and adapt the dosing capacity continuously from 0 to 100%.

The Lutz-Jesco Magdos LB Series has a capacity in the range of 0.09 to 4.00 gph. The max backpressure is 232 psig and works on 110-240 V, IP 65, 50/60 Hz power supply unit. It uses a dosing head ventilation and has an infinitely variable dosing rate ranging from 0 to 100%. Made of construction materials like Polypropylene and Ethylene Propylene Diene Monomer and is CSA and UL certified. It is suitable for floor and wall mounting.

Here are a few models from the Lutz-Jesco Magdos Dosing pumps LB Series:

Lutz-Jesco LB1 50211085 Dosing Pump

The Lutz-Jesco LB1 50211085 has a flow rate of 0.20 at Max Pressure and a flow rate of 0.29 Medium Pressure. It is made of PP/EPDM materials and offers an average Back Pressure of 116 and H2O Suction Lift of 16 Ft. It has a backpressure up to 232 and stroke Freq up to 250.

PumpProducts.com

We, at PumpProducts.com, have recently added Lutz-Jesco Magdos Dosing pumps to our line. We will be shipping these products throughout the United States. PumpProducts.com has years of experience working with pumps, motors, and replacement parts. You can rest assured knowing that you will only get the best from us.

Share