If you need a sump pump that promises a maintenance-free operation, then Myers Sump Pump is your best choice. Explore the MDC Series and MS Series Models here.

Flooding in the basement can affect the foundations of your buildings. Myers Sump Pumps are special pumps designed to remove water that is accumulated in the water collecting pit located in the crawlspace or your building’s basement.

Did you know that more than 60% of homes in America suffer from below-ground flooding? Sump pumps can prevent this. They are very useful in industrial settings as well, where a large volume of liquid is disposed-off after use.

Replacing sump pump parts

Sump pumps experience a lot of wear and tear over the years, and parts repairs or replacements become necessary. The sump pump may get damaged or maybe on the verge of a breakdown. Ideally, you should replace your sump pump parts when:

• It is more than 7 years old.
• It makes a lot of noise.
• It needs to be run all the time because it isn’t as effective as before.
• It is cycling incorrectly.
• There is rust on the pump casing.
• The motor gets stuck, or it fails to switch on.
• Its electrical wiring is damaged.

But often, building owners find it difficult to find the right repairs parts for their sump pump. It then becomes imperative to choose a sump pump brand that makes future repairs and replacements a breeze.

Features of Myers Sump Pump MDC Series Models

The MDC Series Models of sump pumps are highly-versatile pumps designed for light usage in residential buildings. These pumps can also be used for septic tank pumping when there are light, liquid effluents.

In the MDC Series, there are two models that are highly-reputed for their robust construction and long lifespan – the Myers MDC33V1 and the Myers MDC50P1 models. The key features of these MDC Myers sump pump models are:

• The two pump models are perfectly-suited for basement/crawlspace dewatering, light septic tank cleaning, and foundation water transfer.
• The oil-powered 1/2-1/3 HP, single-phase, 115-volt, shaded pole motors of the two pumps support recessed vortex impellers. The pumps are uniquely designed to protect the motors from thermal overload and to quickly cool-down during operation. The lubricated bearings ensure the motors don’t get stuck. The pumps perform at 48 GPM max capacity.
• These pumps are CSA Listed and approved. They come with a 24’’ shut-off head, and the minimum diameter of the sump pump is 12″. These Myers sump pumps are capable of handling solid wastes up to 1/2″.
• The pumps are anti-leak and have strong carbon ceramic shaft seals in place. The cast iron pump bodies are robust and can withstand a lot of abrasions. The pumps have an automatic operation setting as well, which can be set using the piggy-back vertical float switch.
• The Myers MDC33V1 and the Myers MDC50P1models also possess 10”, 16/3, SJTW, SJTW-A power cords, which allow for easy installation and powering.

Myers MDC33V1 Automatic Sump Pump

Features of Myers Sump Pump MS Series Models

If your basement or crawlspace is flooded not just with water but small debris as well, you should consider the Myers MS Series Sump Pump Models. Designed for light-to-moderate dewatering and septic tank effluent management, the MS Series sump pumps can be used in both single-unit and multi-unit households. With an extensive range of models in this series, you’ll be hard-pressed not to find one that suits your needs. But of all these models, the two best sump pump models are the Myers MS33PT10 and the Myers MS33M20.

Important features of the Myers MS33PT10 pump are:

• This robust Myers sump pump supports 3/16″ solid handling. It is designed for sump pits with a diameter of 14″ and more. The tethered float switch enables maintenance-free operation.
• The pump is highly long-lasting, thanks to its tight lip seal and dual ball-bearing PSC motor. The continuous lubrication ensures the motor doesn’t overheat and functions seamlessly. Even the motor housing is abrasion-proof, thanks to its motor coating and thermoplastic volute case.
• The Myers MS33PT10 is a CSA-listed sump pump with a warranty of 3 years.

Myers MS33PT10 MS Series Sump Pump

Key features of the Myers MS33M20 pump are:

• This dynamic sump pump model is popular for being completely maintenance-free in operation. It has been designed to process solid wastes up to 1/4″.
• The premium-quality oil-filled PSC motor with dual ball-bearings and tight lip seal is completely thermal protected.
• The cast iron casing with the anti-corrosive fittings ensures that your sump pump lasts very long.
• This MS series Myers Sump Pump has a 3-year warranty and bears the CSA mark, vouching for its quality.

Myers MS33M20 MS Series Sump Pump

Myers company overview

A sub-brand that falls under the Pentair parent company, Myers Pumps is a globally-reputed manufacturer of sump pumps, pool filtration equipment, water disposal systems, and pump replacement part accessories. The company was founded in 1870 and today has more than a century’s heritage of producing top quality products powered by innovative engineering.

About Pump Products

Pump Products is one of the leading American suppliers of utility pumps and repairs parts. The company has extensive experience serving clients across industries. With a phenomenal track record of delivering world-class products at low prices and at very short delivery times, Pump Products is the premier choice for all pump and repair parts sourcing needs.

Share

There are several parts to a pump. The motor is the most important part, but there are several additional parts to support the system. These include the shaft, shaft seal, adaptor, backing plate, impeller, and the casing. The backing plate is often a part of the casing. So you may have the removable cover. However, these are just some of the key components of a pump.

There are hundreds of very small to bigger sized parts in a pump. Goulds repair parts come in several series. Each of these series may have hundreds of parts. If you are using a Goulds Pumps, then you will need Goulds Pumps repair kits.

If you are planning to purchase a Goulds repair parts kit, you will need to match the specifications. You must ascertain the series and model number because there are hundreds of Goulds Pumps parts categories.

Goulds is a highly reputed company in pumps and pump parts. Goulds Pumps have continued to operate for decades before getting replaced. So, you can rest assured of the Goulds Pumps repair kits.

Float switches

Float switches are an important part of Goulds Pumps repair kits. They are a kind of sensor device. Their task is to detect the level of fluid in a tank. They are designed to open or close an electric circuit. They function in pumps is to control the flow of the liquid and its level. They create an open or close electric circuit to start or stop the liquid’s flow when it reaches a certain level.

A float switch has a hollow floating body with a reed switch and magnet. There are different types of float switches with some variations but essentially the same function. Some float switches may have an external counterweight, and their essential function is to create an open or closed circuit. A magnet is used to create an open or closed circuit.

The two main categories of floats are control switches and pump switches. Pump switches are used to turn submersible pumps on or off. The control switches are meant to sound an alarm when water reaches its level.

Features and benefits of Goulds Repair Parts 2WD series

The Goulds repair parts that you may require can be for one among several series. One of them is the 2WD series. The kit will also serve the 3WD series. This repair kit will fix Residential Submersible 2″ Non-Clog Sewage Pumps Dual Seal with Seal Sensor Probe.

Submersible 2″ Non-Clog Sewage Pumps Dual Seal with Seal Sensor Probe 2WD/3WD

 This pump has applications in several settings, including water transfer, dewatering, sewage systems, commercial, and light industrial applications.

This pump series has substantial features. The fixing requirement is unlikely before decades of continuous use. The pump is made of cast iron, and its impeller is semi-open or enclosed and of non-clog nature. It is dynamically balanced, and special care goes in for mechanical seal protection with pump-out vanes. A Silicon bronze impeller is also available, and the maximum efficiency has been ensured with flanged volute type casing and cast iron. It is protected with dual mechanical seals, and a seal sensor probe is also available in the pump. The shaft of the pump is exceptionally strong and made from corrosion-resistant, 400 series stainless steel.

Features and benefits of 3SD series

3SD series pump repair parts are commercial submersible sewage pumps and include dual seal with seal sensor probe. They find applications in sewage systems, dewatering effluent, flood and pollution control, hospitals, farms, motels, and trailer courts.

The impeller characteristics include cast iron 2 vane construction, non-clog, semi-open impeller with pump-out vanes. There is mechanical seal protection in it. It is designed to operate smoothly. You also have an option of silicon bronze.

Commercial Submersible Sewage Pump Dual Seal with Seal Sensor Probe 3SD

 The maximum efficiency of the pump is ensured heavy-duty cast iron type volute casing. Dual mechanical seals ensure durability and strength. In addition, you have 300 series stainless steel shaft and seal sensor probe.

Features and benefits of PS series

Gould repair parts are available for different series of pumps. Each of these series may have somewhat different applications. One of these series is the PS series, which includes submersible sewage pumps for residential wastewater applications.

                                                            PS Sewage Pumps

These pumps are corrosion resistant construction as they are made from cast iron. In addition, thermoplastic impeller and cover add to their durability, strength, and efficiency. Its upper sleeve and the lower part have heavy-duty ball bearing construction. The pump is powered efficiently and is strong enough to continue working non-stop. Nevertheless, the complete unit is compact and portable, even if it is heavy-duty. The pump comes with stainless steel fasteners.

Goulds Company Overview

The Goulds Pumps is among the oldest companies. Abel Downs, the company founder, began making wooden pumps since 1840 in New York. The company was officially founded in 1848. Then it was known as Downs, Mynderse, and Co. The company continues to enjoy its pre-eminent position in innovative technology and design in fluid solutions.

Pumps’ Products Company

Pumps Products is the nation’s number one supplier of pumps and pump parts. The company supplies the highest quality motors, pumps, parts, and controls at the lowest prices. The company serves its clients by sizing and selecting the most efficient and dependable pumps, motors, and parts at the best prices anywhere on the market.

Share

Transfer pumps are just what their name indicates. They transfer. Transfer pumps such as Red Lion transfer pumps are useful when you are required to transfer liquids from one place to another. You can transfer water or any kind of liquid using these pumps. The water or liquid is drawn in using the pressure difference. It is then transferred.

Features and benefits of Red Lion Transfer Pumps

Red Lion Transfer Pumps are used for a variety of applications. They are used for draining hot water tanks. Their draining applications are also useful when they need to drain aquariums and appliances. These pumps are quite useful when household water pressure needs boosting for the performance of tasks like washing driveways and vehicles. In the Red Lion Transfer Pumps catalog, you can also find a special model that is especially useful for fishing, camping, and hunting.

Red Lion 14942006 Red Lion MPTC Transfer Pump

The Red Lion Transfer Pumps come in several models. One of these models is Red Lion 14942006. This model is also known as Red Lion MPTC Transfer Pump. It has the horsepower of ½, and it operates on115 volts. It has a 3/4″ GHT Discharge. It can efficiently deliver 1250 gallons per hour.

The maximum head in a water pump is the point at which it is zero pressure. In other words, your access must be lower than the maximum head. The maximum head also represents the ideal install condition. The maximum head of this model of the Red Lion Transfer Pumps is 105 feet. It means this pump is capable of moving water over a distance of 105 feet. You will also get a cord of 10 feet with the purchase of this model.

Red Lion 14942006 Transfer Pump

This model is a multi-purpose transfer pump. In other words, it will have multiple applications depending on your needs. Ideally, this pump is known to boost household water pressure. There are several reasons you require to boost your household water pressure. You may find this pump useful when you have to wash driveways or when you have to wash vehicles. With the boosted household water pressure, these tasks can be easily performed. In addition, you will find this model useful in several other transfer and removal of water applications.

It is a utility pump, and it is non-submersible. It’s constructed from heavy-duty cast iron gives it the strength and durability you may be looking for in your pump. The purchase of this pump includes ¾ inches garden hose adapters made of brass.

Red Lion 14942004 Model MPFV-12 Utility Transfer Pump

Red Lion Transfer Pumps are highly specialized for specific functions, while they can also be multi-purpose. It means your choice of an ideal transfer pump should be based on the set of tasks you need. If you need to boost household water pressure to wash vehicles or clean driveways, one specific model of Red Lion transfer pumps will serve your needs best. On the other hand, if you have to drain hot water tanks, aquariums and appliances you will need a specific model which is Red Lion 14942004 Model MPFV-12 Utility Transfer Pump

This model is a multi-purpose 12 volt DC pump considered as the best fit for several applications such as draining appliances, including aquariums and draining hot water tanks. This model may be found highly useful also when you require transfer applications provided the portability is easy.

Red Lion 14942004 Model MPFV-12 Utility Transfer Pump

It requires 12 volts DC to run, and its horsepower is 1/10. It has a discharge of 3/8″ FNPT. Nonetheless, it works like a war-horse at the rate of 300 Gallon Per Hour at its maximum. Its maximum head is 23 feet.

It is a portable pump that you may carry wherever you need to use this pump because it is non-submersible. Its stainless steel construction ensures its quality and durability. It has a dual thread for intake and for discharge both with ¾ inches male garden hose thread, and 3/8 inches FNPT is for pipe connection. The purchase of this model also includes a replacement impeller kit.

In other words, no matter which model of Red Lion Transfer Pumps your purchase, you can be assured of their versatility, durability, and efficiency.

Red Lion Company

Red Lion Pumps is recognized as a global leader in products, and develops and manufactures systems and components related to the movement of water. The Red Lion® brand is a customer-centric company at the forefront of innovation. The company listens to its customers and designs and produces according to their needs with an emphasis on research and development.

Pump Products’ company overview

Pump Products are a well-known master pump and product distributor. The company is recognized for the highest quality pumps and electric motors. The company stocks all major brands based on meticulous research and selection that they sell at the lowest prices. The customer care employees and the engineers of the company have expertise in the products. They are dedicated to assisting their customers with skilled sizing and selection.

Share

Centripro float switches are a kind of sensor device. They help detect the level of fluid in a container or a tank. They can open or close an electric circuit. They are used in devices like pumps and other solenoid devices to control the liquid’s flow and level.

Electromechanical float switches such as Centripro float switches create an open/close electrical circuit when the liquid reaches a certain level to start/stop the liquid’s flow.

Centripro float switches, like any other float switch, have a hollow floating body with a reed switch and magnet. There are slight variations in different types of float switches. There is an external counterweight in some switches. The purpose of the reed switch is to create an open or closed circuit. When the magnet gets close to the reed switch, a closed switch is created, and an open circuit is created when the magnet moves away.

There are two main categories of floats – control switches and pump switches. Pump switches are used when a submersible pump is needed to be turned off or on. The control switches, connected to a control panel are mainly used for sounding an alarm against high water.

Features and Benefits of Centripro Float Switches

If you want to build an efficient water system, you need two things. You need the right products, and you need expert people who know the right application. Centripro is a company that offers both.

The advantage of the Centripro float switch mounting bracket is that it can accommodate up to 5 brackets. No matter where you want to mount it, it can be mounted anywhere, whether fiberglass basis, steel, or concrete. The material and hardware used in it is 304 stainless steel. It includes cord retainers that are non-metallic.

Goulds A2WTC, Cast Iron Float Weight is a weight that can be easily attached to a float switch. The cord weight is zinc plated, and it works perfectly with all float switches.

Goulds A2WTC, Cast Iron Float Weight

Goulds A2WT SJ Float Switch Electro Weight is also a weight that can be attached to a float switch. Its features include PVC housing and adjustable snap-in design.

Goulds A2WT Float Switch Cable Weight

Goulds A2WTC Conery Weight is designed for attachment to a float switch. Its features include zinc-plated cord weight, and it is easily compatible with all float switches.

Goulds A2N23 SJE SignalMaster Control Switch is a narrow-angle float switch that is mechanically activated. It is designed to activate alarms and pump controls.  When the float tips slightly above the horizontal signal, the switch turns on and turns off when the float dips a little under the horizontal signal.

A2N23 SJE Control Switch

The Goulds A2N23 SJE SignalMaster Control Switch finds its application where ever a pump is used to fill or empty fluids in a tank. The applications can include areas dealing with potable and non-potable water, sewage, and other industrial usage forms.

This float switch is a 5 amp float switch with 250 VAC and 50/60 Hz. This is a snap action switch or a mechanical switch that can produce a very fast transfer of one position to another contact. It can be useful in situations where a fast opening or closing action is required in a circuit. The maximum water depth it is capable of operating for is 30 psi or 30 feet. It is not designed to be connected directly to the pump, and it is not sensitive to rotation. Its control differential from the horizontal position is 1.5 inches above or below. The cable is flexible and measures 18 gauge. Its two conductors meet the certifications and standards such as UL, CSA, and SJOW, and its CPE water-resistant quality is the proof of its strength and durability.

The polypropylene covered float is high impact and corrosion-resistant measuring 2.74″ diameter x 4.83″. It can be used in water and sewage up to 140 degrees F. It comes ready as clamp mounted for easy attachment of the switch to any other mounting device or a discharge pipe.

The Goulds A2N23 SJE SignalMaster Control Switch is Underwriter Listed for use in sewage and water. It means the product meets the basic requirements that are specifically defined. It is also CSA certified. The CSA Group is an organization that certifies the quality of different kinds of products in 57 areas. This is a registered mark that guarantees that the product meets all the essential requirements of performance and safety.

Centripro Float Switches come in a wide range. No matter what your choice is, you will find something that meets your requirements. They come with a guarantee of quality and durability.

Centripro company overview

Centripro is a Xylem brand and a part of the Goulds Water Technology. This brand is the global leader in commercial and residential water products.

Pump Products’ company

If you are still not sure which CentriPro Float Switch will serve your purpose the best for your needs, you can contact the Pump Products company, the nation’s top pumps, and parts suppliers directly at 1-800-429-0800. The company has a team of experts ready to guide the customers on the best product according to their specifications.

Share